SOLTRACK STICKER SOLES AND HEELS

SOLTRACK INSTRUCTIONS - HEELS AND HEEL TIPS

STICK-ON HEELS INSTRUCTIONS

1. The heels of the shoes must be thoroughly dry and free from grease.
Carefully mark the outline of the shoe heel on the plain side of the
SOLTRAK Stick-on Heels and cut to shape with a pair of sharp scissors.
Smoother the cut edges with the rougher tool provided. Brush off any
loose particles of dust.

2. To open the adhesive pierce the seal. Using the folded roughing tool
spread an even coat of adhesive over the roughened area of the shoe heel
and leave for 15 minutes to dry. Then apply and even coat of adhesive to
the SOLTRAK Stick-on Heel and a second coat to the roughened area
of the shoe heel. Leave for 15 minutes when the adhesive will
be in the correct condition for sticking.

3. Fit the Stick-on Heel on to the shoe heel in the required
position. Press firmly together. Thoroughly press all over,
especially around the edges. Leave for two minutes and then
press round the edges again.

4. Leave the shoes for 8 hours before wearing.

WARNING
Highly Flammable. Irritating to eyes. Harmful to aquatic organisms,
may cause long term adverse effects in the aquatic environment.
Repeated exposure may cause skin dryness or cracking. Vapours
may cause drowsiness and dizziness. Keep out of reach of children.
Use only in well ventilated areas. Keep away from sources of

ignition - NO SMOKING. In case of contact with eyes, rinse

immediately with plenty of water and seek medical advice. If
swallowed, seek medical advice immediately and show this label.
Avoid spillage onto shoe uppers, clothing, carpets, etc.

Produced in the U.K. by

TR Lawman
NN10 6BQ
T +44 (0) 1933 355807
F +44 (0) 1933 419947
M sales@trlawman.co.uk

Stay in touch

Newsletter sign up